The WPS method can be used to set up a Wavlink range extender ona computer or on a mobile device using “192.168.10.1 or wifi.wavlink.com".The web interface of the device is generally recommended for new users tocomplete the setup process. Because of the WPSconnection method, the Wavlink extender setup process has become moreconvenient. The WiFi name and network key of the router with which the range extender is connected are not necessary for the user to know. All that is
required is that the router to which the range extender is connected supports
the WPS connection method. Ensure that the router's front panel has a physical
WPS button.

Steps to set up the Wavlink range extender using: “wifi wavlink com” 192.168.10.1 

• Unbox and connect the range extender to a nearby power outlet.
• After the range extender has been turned on, go to the computer or mobile device
  and turn on the wifi.
• Scanning for available Wi-Fi networks near the range extender.
• Connect to the default Wavlink WiFi name.
• Start a browser on your computer once you've connected to the extender's
  network.
• In your browser's address bar, type 192.168.10.1 or wifi.wavlink.com. Hit enter and the configuration page appears on the screen.
• In the provided field, type your default login password (admin) and click Login.
• When you are finished, click Next. It is recommended to customize the Wi-Fi settings by entering a new network name
  and password to manage the security level of the network.
• Assign a unique Wifi name to the router and type in the Wifi password to the router’s network.
• A Wifi password should be different from the login password.
• In the next one, select “Repeater Mode” and find the host’s Wi-fi network name on the list.
• Type in the Wi-fi password of the host’s network and click on the Connect button.
• Wait for a few seconds until the screen shows a 100% connection.
• Once the connection process is done, wait for 60 seconds to allow the transmission of Wi-Fi signals.
• When the Wi-fi LED comes back to solid blue, it indicates that you have clean and clear Wi-fi signals.
• Now, you can relocate your range extender to an optimal place.
• When you connect it, wait for one to two minutes to allow it to connect.
• It is connected to the router when the LED returns to blue after flashing
  red.

As soon as the setup is completed, relocate the extender to the placebetween the router and the no coverage zone or dead zone where it will get
strong wifi signals. You can look up the location in the instruction manual if
you can't find it. Wifi.wavlink.com occasionally fails to respond. Youcan use 192.168.10.1 instead. Contact us if you have any otherquestions.